www.blaubergventilatoren.de
Helix/s-Vent
9
After the fan unpacking, prior to the mounting:
• read carefully the user’s manual and the mounting, start-up, operating and servicing guidelines.
• Check the fan for any transport damages.
• Fulfil the safety requirements during set-up and operation of the fan.
MOUNTING STEPS FOR THE FAN S-VENT
• Make sure that the motor is disconnected from power supply (Fig. 1).
• Bore holes and fasten the fixing bracket using the appropriate fasteners (i.e. expansion anchors). In case of need use the vibration
dampers VVCr or VVCp (specially ordered accessories), (Fig. 3).
• Provide reliable grounding of the fan (Fig. 4).
• Connect the air ducts to the fan. On the air intake side install the flange FVC-Helix, FVC-S-Vent (specially ordered accessories) (Fig.5) or the protecting
grille RVC-Helix, RVC-S-Vent (
Fig
. 6).
INSTALLATION AND SET-UP
S1
PE
1.
2.
3.
4.
5.
6.
