16
www.blaubergventilatoren.de
KOMFORT EC L S6
Function
Button/Button combination
Indication
5
Filter replacement or cleaning indicator.
After 3000 operating hours the control panel display shows the warning filter cleaning or replacement indicator instead of the operating temperature.
Clean or replace the filters and then reset the motor meter.
Filter replacement or
cleaning indicator
-
Press the button on the control panel to turn the unit off and disconnect it from
power supply. Replace the filters as stated in the „Maintenance“ section.
-
After the filter replacement connect the unit to power supply and press a
respective button on the wall-mounted control panel or on the remote controller
to start the unit.
or
-
Resetting motor hours
press synchronously
and
-
7
Date and time setting
Press a respective button on the wall-mounted control panel to turn the unit off.
-
Changeover to the date and time setup mode
press and hold
press
-
Selection of the adjusted set point. The set point blinks during setup.
The date and time set points are displayed as follows:
1. Minutes; 2. Hours; 3. Week day; 4. Date; 5. Month; 6. Year.
when pressed
press
or
-
Setting of the set point
press
or
-
Exit the date and time setup mode
press
-
Table 6. Unit control and setup (continued)
