BLAUBERG Ventilatoren KOMFORT EC S S11/S15 Series, Operation Manual

18

www.blaubergventilatoren.de

KOMFORT EC S/SB

Function

Indication

9

Language selection



 To select the control panel interface language select the 

LANGUAGE 

submenu

 from the 

Engineering menu

 and press 

ENTER

.



 Select the desired language from the list. 



 Press 

ENTER

.  



 To return to the 

Engineering menu

 without saving changes press 

EXIT 

.

10

Extra options



 Select the 

EXTRA OPTIONS

 submenu from the 

Engineering menu

 and 

press 

ENTER

.



 The 

SUPPLY FAN OFF

 mode helps to prevent heat exchanger freezing 

and requires disabling of the 

HEATING CONTROL

 parameter.



 To activate the heat exchanger freezing protection function by means of 

the supply fan deactivation set the 

HEATING CONTROL

 parameter value 

to 

OFF.

 To proceed to the function setup set the 

SUPPLY FAN OFF MODE

parameter to 

ON

. 



 TTo select a humidity sensor type set 1 for the duct sensor (exhaust duct) 

or 2 for the room sensor in the 

HUMIDITY SENSOR SELECTION 

menu  item.    



 For selecting the bypass operation mode set 1 in the 

BYPASS 

OPERATION MODE

  to select the regular operation mode, which prevents 

heat exchanger freezing, or 2 to enable bypass opening in the ventilation 
mode. 



 To save the changes and return to the 

Engineering menu

 press 

EXIT

.



  If the 

SUPPLY FAN OFF MODE

 parameter is set to 

ON

 the control panel 

switches to the 

SUPPLY FAN OFF MODE

 setting.



 Select an item by touching the respective fi eld: 

WORKING HOURS, 

DOWNTIME

 and 

SWITCH-OFF TEMPERATURE

 (the temperature is set 

according to the outdoor temperature sensor readings defi ned in the range 
from 0 °C to -30 °C).



 Then use 

 or 

 buttons to set the desired value.



 Press 

ENTER

 to confi rm the parameters. 



 To return to the Engineering menu without saving changes press 

EXIT

.

11

Password change



 Select the 

PASSWORD CHANGE

 submenu from the 

Engineering menu

and press 

ENTER

.



 Then enter the new password for accessing the 

Engineering menu

.



  Press 

OK

. 



 To re-enter the password press 

RESET.

 This operation clears the 

ENTER NEW PASSWORD

 fi eld.



 To return to the 

Engineering menu

 press 

EXIT

.

Table 6. Unit control and adjustment of operating parameters of the unit with the S11 control panel (continued)