BLAUBERG Ventilatoren KOMFORT Roto EC S2 200, User Manual

www.blaubergventilatoren.de

KoMFort roto ec S2(e)200

9

2. Remove the decorative panel, and then remove the service panel by unscrewing the 6 screws. Disconnect the ground cable from the service panel.
Then remove the back panel of the unit by undoing the 6 screws. It is also necessary to disconnect the ground cable from the back panel.
Install the back panel instead of the service panel and the decorative and service panels instead of the back panel.

Decorative panel
Service panel

EXHAUST KITCHEN HOOD MOUNTING 

Unscrew the feet of the unit for floor mounting.  Then undo the four self-tapping screws and remove the plug in the bottom panel. Lead the kitchen 
hood cable into the unit and connect it according to the external connections wiring diagram (page 12).  Fix the exhaust kitchen hood on the bottom 
part of the unit using the four self-tapping screws.

Feet for floor mounting

Kitchen hood

Plug

Cable opening

Self-tapping screws

DECORATIVE PANEL MOUNTING

The decorative panel must be installed using the suspension brackets (included in the delivery set). Fix the suspension brackets on the decorative 
panel according to the drawing. Then install a decorative panel by inserting the brackets in special holes.

700

430

84

84

598

560

11

12

55

Decorative panel
Brackets