www.blaubergventilatoren.de
10
Komfort Ultra (EC) L (S) 250 (300) - H(E)
2. Remove four triangular screws and suspend the suspension brackets. Then unscrew six fixing screws from the back panel and
remove the panel. Install the back panel on the opposite side of the unit.
3. Install the limit switch, the latches and the service panel on the opposite side of the unit.
Service side change is shown by the example of the Komfort Ultra (EC) S 250(300)-H(E) air handling unit.
The procedure of the service side changing for Komfort Ultra (EC) L 250(300)-H(E) is carried out in the same manner.
CONDENSATE DRAINAGE SYSTEM CONNECTION
The hole for the drain pipe is at the bottom of the unit. Remove the plug from the hole, open the service panel and install the drain pipe
from the delivery set into the hole, then connect the drain pipe to the sewage system using the KIT SFK 20x32 U-trap kit (available upon
separate order). While laying the hoses provide the slope downward min. 3
o
.
Drain
pipe
Drain
hose
min 3
°
Sewage
system
Sewage pipe
Ø
32 mm
U-trap
