www.blaubergventilatoren.de
4
Komfort Ultra (EC) L (S) 250 (300) - H(E)
Due to the ability to save heating energy by means of energy recovery the unit is an important element of energy-efficient premises.
The unit is a component part and is not designed for independent operation.
The unit is designed to ensure continuous mechanical air exchange in houses, offices, hotels, cafes, conference halls and other
utility and public spaces as well as to recover the heat energy contained in the air extracted from the premises to warm up the filtered
stream of supply air.
PURPOSE
THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL,
MENTAL OR SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING.
THE UNIT MUST BE INSTALLED AND CONNECTED ONLY BY PROPERLY QUALIFIED
PERSONNEL AFTER THE APPROPRIATE BRIEFING.
THE CHOICE OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED
ACCESS BY UNATTENDED CHILDREN.
The unit is designed for floor and suspended mounting.
The unit is rated for continuous operation.
Transported air must not contain any flammable or explosive mixtures, evaporation of chemicals, sticky substances, fibrous
materials, coarse dust, soot and oil particles or environments favourable for the formation of hazardous substances (toxic substances,
dust, pathogenic germs).
DELIVERY SET
Name
Number
Air handling unit
1 item
User's manual
1 item
Control panel
1 item
Mounting box for wall flush mounting
(only for Komfort Ultra EC S(L)300-H(E) S14)
1 item
Mounting box for wall surface mounting
(only for Komfort Ultra EC S(L)300-H(E) S14)
1 item
Drain pipe
1 item
Fastening kit
1 item
Packing box
1 item
DESIGNATION KEY
Komfort Ultra EC S 300-H S12
Series of units
Motor type
EC – electronically commutated
Rated
air capacity [m
3
/h]
Spigot orientation
S - vertical spigot orientation
L - horizontal spigot orientation
Heat exchanger type
H - aluminium plate heat exchanger
E - enthalpy heat exchanger
Control device
S2 - CDT E/0-10 speed controller
S12 - SGS E1 sensor speed controller
S14 - sensor control panel