Support panel
Protecting housing
of the terminal box
Outer casing
Insulated motor cover
The roof-mounted smoke extraction fan consists of the welded support panel to which are attached:
• electric motor covered with an insulated cover
• terminal box located on the outer casing of the fan
• impeller located inside the support panel
The motor with the impeller is rigidly fixed to the support panel.
Welded sheet steel construction. The hub and clamping screw are connected directly to the motor shaft.
Motor: standard fan models are equipped with three-phase electric motors rated for 400 V, 50 Hz, protection class: IP55, insulation class:
F (IEC).
www.blaubergventilatoren.de
tower-sV-k2
10