background image

www.blaubergventilatoren.de

vento expert (Duo) a W v.2

14

REMOTE CONTROL OF THE VENTILATOR

Turning on/Standby. The 

Standby

 mode depends on positioning of the DIP switch No. 2 (refer to page 12). The 

same button is used to reset alarms 

(Alarm)

 and turn off the timers.

Speed selection: III-II-I speeds respectively.

Regeneration mode

Vento Expert
Rotation direction of the fan changes once in 70 seconds. Heat regeneration is accomplished in the Regeneration 
mode. The fan rotation direction depends on the position of the DIP switch 3.
Vento Expert Duo
Rotation direction of the fans changes once in 70 seconds. Heat regeneration is accomplished in the Regeneration 
mode.

Ventilation mode

Vento Expert
The ventilator runs in the extract or in the supply mode at the set speed. The fan rotation direction depends on 
the position of the DIP switch 3.
Vento Expert Duo
One fan runs in the extract mode and the other one in the supply mode at the same speed. The air direction is 
not changed.
Timer control buttons:

 

Party mode: 

the timer activates operation of the ventilator with the speed III, 4 hours by default. The time 

setting may be edited with the mobile application.

 

Night mode: 

the timer activates operation of the ventilator with the speed I, 8 hours by default. The time 

setting may be edited with the mobile application.
The ventilator reverts to operation with a previous speed setting upon the timer countdown.
Press any speed setting button to deactivate the timer or press the timer control button once again.

Summary of Contents for Vento Expert A100-1 W V.2

































Reviews: