Freshbox 100 WiFi
18
www.blaubergventilatoren.de
Control buttons:
— Unit on/Standby.
1
— Selection of pre-set speed.
— Timer activation. Timer settings are made in
the Basic Settings
-
Timers menu
.
— Week-scheduled operation mode activation. The settings of this mode are made in
the Basic
settings
-
Schedule menu
.
Recirculation
— Activationof the recirculation mode. If there is no recirculation mode, the button is inactive.
Heater
— Selecting the temperature setpoint for the reheater or turning it off.
Basic settings
Timers
Main timer:
Timer mode settings.
When the timer is activated in the Home page menu, the unit temporarily goes to the
following settings:
1
—
Selection of pre-set speed
1-5, Standby
.
00:30
— Timer setting
— Timer setting
Control temperature selection. Ava15 ° С.. + 30 ° С, off. If OFF is selected,
temperature control will not be performed while the timer is running.
Boost turn-off delay:
determines the turn-off delay time for the Boost mode after
the signal at the digital input (Boost switch) disappears on the control board.
Boost turn-on delay:
determines the turn-on delay time for the Boost mode after
the signal is applied to the digital input (Boost switch).
Schedule
The weekly schedule can be set by means of 4 time intervals available for each day
of the week.
Adjustment can be made for every day, weekdays, weekends or for the whole week.
When the Weekly Schedule mode is activated from the Main page, the unit will
operate as scheduled according to the following parameters:
1
—
Selection of pre-set speed
1-5,
Standby
.
— Time setting for a specific segment.
— Control temperature selection. Ava15 ° С.. + 30 ° С, off.
If OFF is selected, temperature control will not be performed while the timer is
running.
