The plate opposite to the service side must be fixed with screws (included in the delivery set) before installation.
min 5
7
/
8
Unit floor mounting
Install the unit on the pre-mounted floor supports, minimum
5
7
/
8
inch height, to ensure sufficient access for the drain pipe
connection to the U-trap and for condensate drain system
installation.
Unit wall mounting
Fasteners (dowels, self-tapping screws) for wall mounting
are not included in the delivery set and should be ordered
separately.
While choosing fasteners consider the material of the mounting
surface as well as the weigh of the unit, refer to the Technical
data section. Fasteners for unit installation should be selected
by a qualified technician.
Secure the wall bracket at required height. Hang the unit on
the wall bracket and secure it with a screw.
www.blauberg.us
MUI_83_Komfort EC S5B270 S14_EN-01
174 N. 36th Street, Lafayette, IN 47905
e-mail: info@blauberg.us
2
