www.blaubergventilatoren.de
11
VENTO Eco / VENTO Eco2
To enable easy installation of the cartridge in the air duct cut
out a recess in the mounting foam layer on the side of the
cable installation parallel to the groove in the air duct.
For freedom of placement of the cable in the groove without
any damage to the cable insulating material, cut off the excess
of the mounting foam.
5. Install the cartridge in the air duct.
6. Connect the socket connector from the control panel in compliance with the external wiring diagram. Connect the socket connectors
of the cartridge and the control panel.
7. Install the internal grille and fix the external grille.
External grille
Internal grille with a decorative panel
For mounting of the outer ventilation hood, please refer to a respective hood installation instruction.