www.blaubergventilatoren.de
3
VENTO Ergo A25-1 Pro/A25-1 S Pro
WARNING
Do not dispose in domestic waste.
The unit contains in part material
that can be recycled and in part
substances that should not end up
as domestic waste.
Dispose of the unit once it has
reached the end of its working life
according to the regulations valid
where you are.
ATTENTION
The product is not allowed for use by children
and persons with reduced physical, mental or
sensory capacities, without proper practical ex-
perience or expertise, unless they are controlled
or instructed on the product operation by the
person(s) responsible for their safety. Supervise
the children and do not let them play with the
product.
WARNING
Make sure the unit has no visible transport damages while accepting the goods. Check
the ordered and the delivered goods for compliance.
ATTENTION
Read the operation manual prior to any electric installations. Connection of the unit to power mains is
allowed by qualified professionals.
WARNING
Read the operation manual prior to any electric installations. Connection of the unit to
power mains is allowed by a qualified electrician only.
The rated electrical parameter are stated on the rating plate. No modifications of internal
connections are allowed and will result in void warranty.
Connect the fan only to power mains with valid electric standards. The unit must be
connected to a correct mounted socket with a grounded terminal or connected to a fixed
installed cable.
Follow the respective electric standards, safety rules (DIN VDE 0100), TAB der EVUs. The
house cabling system must be equipped with an automatic switch at the external input.
Connect the unit to power mains through the automatic switch. The contact gap on all
poles at least 3 mm (VDE 0700 T1 7.12.2 / EN 60335-1).
Install the automatic switch to ensure prompt access.
WARNING!
Disconnect the unit from power mains prior to maintenance operations!
ATTENTION
After installation of the filters and the heat exchanger in the unit, press and hold the button
on the remote controller to reset the motor meter. A long sound signal confirms reset of
the motor meter.
