16
PICTURE MENU
Picture Mode
- Choose from the following presets:
Dynamic
Recommended settings for fast moving pictures
Standard Standard
settings
Mild
Set to be lighter in colour and less bright
Personal
Lets you manually alter all the settings
Home Mode
This is a power saving mode which reduces the energy usage
by up to 25% (by reducing the power to the LED/LCD panel).
In Home Mode, the TV will switch itself into Standby after
4-5 hours in the event that the TV buttons or remote control
buttons are not pressed
You can make the following adjustments in
Personal
mode:
Contrast
- Switch the balance between black and white.
Brightness
- Increase or decrease the brightness of the picture.
Colour
- Increases the colour from black and white.
Tint
- Lets you increase or decrease the level of tint within the picture
(only available in VGA/PC source mode).
Sharpness
- Increase or decrease the sharpness of the picture.
Noise Reduction
- Choose from the following presets:
Off
Turns noise reduction off
Low
Minor system adjustment
Middle
Medium system adjustments
High
Maximum system adjustments
Default Default
settings
Colour Temperature
Choose from the following presets:
Normal Default
settings
Warm
Increases red within the picture
Cold
Increases blue within the picture
TV Menu Operation
To access this menu, press [MENU] button on the remote control and scroll right.
To enter a menu press [OK]
If you wish to make changes to any of the default settings, use the scroll
buttons.
To confi rm any settings press [OK] button. To exit this menu at anytime, press [EXIT] button.
User Guide -BLA-MAN-0172 215-189J-GB-EU-UK 236-189J-GB-EU-UK.indd Sec1:16
User Guide -BLA-MAN-0172 215-189J-GB-EU-UK 236-189J-GB-EU-UK.indd Sec1:16
11/21/2013 1:36:47 PM
11/21/2013 1:36:47 PM
