11
11
Wall mounting the TV
IMPORTANT - Before drilling any holes in the wall ensure you are not drilling
where there could be any electric wires, water or gas pipes.
1) Remove the four screws highlighted that are supplied in the wall
mounting holes.
2) The wall mount can now be easily attached to the mounting holes on the
rear of the TV.
fi g 1
fi g 2
For optimum viewing, if wall mounting the TV
higher than eye level, the TV should be tilted
downwards so that the TV’s screen is ‘face on’.
See fi g 1 and 2
Important – If wall mounting this TV, only
use the screws already provided in the wall
mounting holes. Using other screws which
are longer could cause irreparable damage to
internal parts.
TV
Viewing angle
Viewing angle
INCORRECT
CORRECT
Wall mounting / Securing the TV to a Wall
WALL MOUNTING
Securing the TV to a Wall
For your safety you can secure the TV to a wall using a fastening chord. With this method you can prevent
the TV from falling forward which could cause injury and/or damage to the TV.
A)
Using one or both of the top wall-mounting
holes and screws (the screws are already supplied
in the wall mounting holes) fasten one end of the
fastening chord/s to the TV.
B)
Secure the other end of the fastening chord/s to
your wall. (you will need screws/fi xings suitable for
your wall type - available separately from most
DIY stores)
Note - Please ensure that children do not climb on the TV set.
User Guide - Blaupunkt - 32-147I-GB-5B-HBKUP - 32-147I-GB-5B-HBCDUP - BLA-MAN-0177.indd Sec1:11
User Guide - Blaupunkt - 32-147I-GB-5B-HBKUP - 32-147I-GB-5B-HBCDUP - BLA-MAN-0177.indd Sec1:11
12/11/2013 4:04:12 PM
12/11/2013 4:04:12 PM
