15
EN
REPLACE THE DUST BAG
When the dust bag is full, the ‘FULL UP’sign is continuously high
brightness, and app notice is given. Please replace the dust bag in
time. The ‘COLLECTING’ sign will be high brightness while the collector
is working. When the host is fully charged, the mark of ‘BATTERY’is all
green and high brightness, battery power is less than or equal to 50%,
just a half mark is high britghtness.
CLEAN THE DUST PASSAGE
If the 'FULL UP' sign ,The 'COLLECTING' sign and the BATTERY sign all is
twinkling after the dust bag is replaced, it is recommended to pull out
the power plug and reverse the auto station to check whether there
are materials blocking the dust passage. If the dust passage is blocked,
refer to the
fi
gure below and remove the transparent cover of the dust
passage with a screwdriver to remove the blocking materials.
7. MAINTENANCE
Open the
upper cover
Close the
upper cover
Make sure that the
dustbag is installed
in place
Correct installation
Place a new dust bag
Pull up the lifting
handle of the dust
bag and take out
the dust bag
Throw away the
used dust bag
Transparent cover of
dust passage
Dust passage
