Blaupunkt Bluebot User Manual Download

Page: 22 / 24

Troubleshooting

Troubleshooting for Motors

Error code

Cause

Solution

L01x

Fan overloaded

Check if fan is pressed, and clean dust bin

L0x1

Left wheel overloaded

Check if it

’s stuck or wired by obstacles

L0x2

Right wheel overloaded

L0x3

Left and right wheel overloaded

L0x4

Left side brush overloaded

L0x5

Left wheel and left side brush overloaded

L0x6

Right wheel and left side brush overloaded

L0x7

Left and right wheel, left side brush overloaded

L0x8

Right side brush overloaded

L0x9

Left wheel and right side brush overloaded

L0xA

Right wheel and right side brush overloaded

L0xB

Left and right wheel, right side brush overloaded

L0xC

Left and right side brush overloaded

L0xD

Left wheel, left and right side brush overloaded

L0xE

Right wheel, left and right side brush overloaded

L0xF

Left and right wheel, left and right side brush

overloaded

L02X

Roller brush overloaded

Note:

1. There is no problem for the robot when it displays L000.

2. X is the number or letter might appear on display for different fault.

3. If robot displays E001 or E004, please find EXX1 or EXX4 for relative solution referred in trouble

-shooting.

4. If robot displays EC07, please find ECXX and EXX7 for relative solution referred in troubleshooting.

5. Like wise, if robot displays EE91, please find EXX1 and EX9X relative solution referred in trouble

-shooting.

6. If above solution does not work, please try below:

a. Reset the robot by switching off the unit and then turn it on, and check again.

b. If it still does not work after reset, contact after sales.

UV light might hurt your eyes, so please do not stare directly at the light when turned on.

Summary of Contents for Bluebot

























Search results

Summary of Contents for Bluebot

Reviews:

Related manuals for Bluebot

Brands by name

Popular brands

Blaupunkt Bluebot, User Manual

Search results

Summary of Contents for Bluebot

Reviews:

Related manuals for Bluebot

Brands by name

Popular brands