User manual
BTD-7000 / BTD-7001
9
* The alarm will turn on again at the same time next Monday.
6.
“WEEKENDS” is selected and tomorrow is Monday. The “ALM” icon remains on the display.
* The alarm will turn on again at the same time next Saturday.
Cancel alarm settings
In Standby mode, long press
ALARM
button until “ALARM OFF” appears on display. Press
ALARM
again to confirm and
“ALM” icon disappears from display. The alarm is cancelled.
SLEEP TO THE RADIO
In sleep mode, the radio will turn off automatically after a specified time.
5.
Press
SLEEP
button repeatedly to set the sleep time: OFF> 5> 10>15>30>45>60>90>120> OFF…
6.
Release
SLEEP
button. After 5 seconds the radio is turned on. “SLEEP” icon remains on the display.
7.
Press
SLEEP
button to check the remaining sleep time.
8.
If you want to switch off the radio before sleep ends, press
ON/OFF
button.
DIMMER
Press
SNOOZE/DIMMER
repeatedly in standby mode to set the brightness of LCD display.
RADIO
Listening to the Radio
1. Press
ON/OFF
switch to turn on the radio.
2. Press
FUNCTION
button to select FM or MW band.
3. Press
or
to tune to your desired radio station.
4. Adjust the volume to desired level.
5. Press
AUDIO
button repeatedly to select desired sound preset: VOICE, MUSIC or NORMAL.
6. Press
ON/OFF
button again to turn off the radio.
To enhance radio reception ability:
FM: Extend the telescopic antenna.
MW: Rotate the unit horizontally for optimum reception.
Presetting radio stations
1. Tune to a station.
2. Press
MEMO
once and the display will show flashing “1”.
3. Press
or
to select a preset number.
4. Press
MEMO
again to save station as selected preset number.
5. Repeat above steps to preset a maximum of 40 stations (20 MW / 20 FM).
Retrieving the preset stations
·Press
or
to access a preset station.
RDS FUNCTION
When FM station with RDS is received, the station name (PS) is displayed. Press
RDS
button repeatedly to display the
program type (PTY), the radio text (RT), the frequency and the station name (PS).
CONNECTING AUXILIARY SOURCE
1.
Connect your auxiliary source (e .g. mp3 player) to the
LINE IN
jack on the left side of the unit.
2.
Press
FUNCTION
button to
select LINE IN mode.
3. Start playback from your auxiliary source.
3.
Adjust the volume to desired level.
4. To stop playback, disconnect your auxiliary source from the
LINE IN
jack.
PRODUCT INFORMATION
Power consumption:
5W
Frequency Range:
FM 87.5-108.0 MHz
MW 530-1600 KHz
BLAUPUKT
TECH
SA
