33
DEUTSCH
ENGLISCH
FRANÇAIS
ESP
AÑOL
PORTUGUÊS
IT
ALIANO
NEDERLANDS
SVENSKA
NORGE
SUOMI
TÜRKÇ
E
Setting the Balance and
Fader
Adjusting the balance
➮
To adjust the balance, press
GEO
;
.
“BAL” and the set value appear on the
display
B
.
➮
Turn the volume control
3
to
adjust the balance. Turn clockwise
or anti-clockwise to shift the
volume to right or left.
Balance “0” = middle setting
Adjusting the fader
➮
To adjust the fader settings for
front/rear, press GEO
;
.
“BAL” and the set value appear on the
display
B
.
➮
Press GEO
;
again.
“FADER” and the set value appear on
the display
B
.
➮
Turn the volume control
3
to
adjust the fader. Turn clockwise or
anti-clockwise to shift the volume to
front or rear.
Fader “0” = middle setting
Note:
The fader for front/rear cannot be set
unless an additional amplifier has been
connected.
Resetting the tone and the
balance and fader
You can reset the tone and balance/
fader settings to zero.
➮
To reset these settings press GEO
;
for longer than two seconds.
“AUD ZERO” will appear briefly in the
display
B
.
BALANCE AND FADER