background image

34

Radio operation

This car audio system has been
equipped with an RDS radio receiver.
Along with their regular station program-
ming, many FM radio stations now
transmit the RDS signal, which contains
such other information as the station
name and the programme type (PTY).

As soon as the car audio system re-
ceiver detects the station name, it will
appear in the display 

B

.

Switching to the radio mode

If you are currently using the Cassette
or the CD changer,

press SRC 

<

 repeatedly until

“RADIO” appears in the display 

B

.

Special RDS functions (AF, REG)

The special RDS functions for AF (Al-
ternativ Frequency) and REG (Re-
gional) enhance the performance of
your car audio system.

AF: If this RDS function is activated, the
car audio system continuously searches
in the background for the frequency with
the best reception for the station you
have tuned into.

REG: A number of radio stations broad-
cast different regional programming at
different times of the day. Use REG to
prevent your car audio system from tun-
ing into alternativ frequencies which
might have different programming.

Note:
It is necessary to activate/deactivate
REG in the menu.

Switching RDS functions on/off

To take advantage of the RDS
functions for AF and REG, press
RDS 

5

.

When the RDS functions have been
activated, “RDS” will light up as a sym-
bol in the display 

B

.

Switching REG on/off

Press MENU 

?

.

Press   or   

>

 repeatedly until

“REG” appears in the display 

B

.

“OFF” or “ON” will appear next to “REG”.

Press   or   

>

 to switch REG off

or on.

Press MENU 

?

.

Note:
When the REG function is activated, the
radio will try to pick up the regional
programme of the station you have
tuned into for as long as possible. Once
you leave the station reception range,
you should switch REG off.

Selecting wavebands/memory
banks

Using this car audio system, you can
tune into radio stations on the FM, MW
and LW wavebands. There are three
memory banks for the FM waveband
and one memory bank each for MW and
LW. You can store five stations in each
of these memory banks.

RADIO OPERATION

Summary of Contents for COACH CRC 41


























Reviews: