44
TANDEM OUTPUT
Tandem output
The unit is equipped with a tandem
output (Section C1) to enable you to
connect the Coach Control Amplifier
CCA 41. If the tandem output is
activated, the audio signal from the radio
and cassette is sent to the control unit
(CCA 41) at a fixed level.
This allows you to set a different audio
source output for the cabin and cockpit
areas.
In order to use the tandem output, you
must first activate it in the menu.
Note:
In tandem mode: if the passengers and
driver are listening to a cassette, and
the driver then decides to switch, for
instance, to radio mode, the passengers
will continue hearing cassette playback
regardless.
Activating / deactivating
the tandem output
➮
Press the MENU button
?
.
➮
Repeatedly press the
button
>
until “TAND OFF” or “TAND ON”
appears in the display
B
.
➮
Press the or button
>
to
activate / deactivate the tandem
output
➮
Once you have finished making
changes to the settings, press the
MENU button
?
.
SPECIFICATIONS
Specifications
Operating voltage
24 volts
Amplifier
Output power:
2 x 20 watts sinus
acc. at 4 ohms
Line output:
2 x 2.0 volts eff
Tandem output:
4 x 2.0 volts eff
Aux input:
2 x 2.0 volts eff
Tuner
Wavebands for Europe:
FM:
87.5 - 108 MHz
MW :
531 - 1602 kHz
LW :
153 - 279 kHz
Wavebands for America:
FM:
87.7 - 107.9 MHz
AM :
530 - 1710 kHz
FM frequency response:
30 -15 000 Hz
Cassette
Transmission range:
30 -18 000 Hz
Subject to technical modification!