saw with both hands.
Keep a safe distance from bystanders.
Despite the safe design and using protective measures
and additional safeguards, there is always a residual risk
of injury during work.
Detailed safety instructions for chainsaws.
Do not attempt to cut metal.
Do not use detergents or alcohol to clean the saw. Wipe with a
soft dry cloth.
Do not use accessories not specifically intended for this device
and recommended by the manufacturer. The fact that some
accessories can be mounted to a power tool is not a guarantee
of safe use.
The accessory mounting system must correspond to the
dimensions of the power tool. Tools of improper dimensions
cannot be sufficiently shielded or controlled.
Use personal protective equipment. Depending on the type of
work, wear a protective mask covering the whole face, eye
protection, e.g. safety goggles. Eyes should be protected from
airborne foreign matter ejected during operation. Protect the
respiratory tract against dust and vapours with dust masks. The
effects of prolonged exposure to noise can lead to hearing loss.
Be careful that bystanders are kept at a safe distance from the
working range of the chain saw. Anyone who is close to the
operating power tool must use personal protective equipment.
Chips of the material being cut or cracked work tools can chip
and cause injuries even outside the immediate reach zone.
Never move the power tool when it is in motion. Accidental
contact of clothing with a working tool may cut it and come
into contact with the operator's body.
Regularly clean the device's ventilation slots. The motor blower
sucks dust into the housing and a large accumulation of metal
dust can cause an electrical hazard. Blocked ventilation slots of
CS3010 4010
5
Summary of Contents for CS3010
