the device can also lead to overheating of the power tool.
Before starting each time, make sure that:
- the device is assembled correctly, according to the
instructions;
- the cutting tool is in good condition; the chain attachment
must be checked regularly for damage and wear;
- safety devices (e.g. cutter guard, housing, handle, motor
switch) are in good condition and working properly.
Only move the chainsaw away from the workpiece when the
cutting chain is running.
Always use the support claws as a support point when cutting
through. Holding the saw by the main handle, guide it with the
auxiliary handle.
If it is not possible to cut the material at one time, pull the saw
slightly back, move the support claw and continue cutting by
lifting the main handle of the saw slightly.
Be extra careful when the chain gets stuck. This may result in
the kickback towards you.
After the saw is switched off, the chain remains in motion for
some time. Caution must be maintained.
The rotating chain of the saw heats up and expands. Without
proper lubrication and tension, it can jump off the guide bar or
break off. Danger of serious accident and damage to property.
Always turn off the saw when:
- is left unattended;
- before adjustment and maintenance;
- after it being hit by a foreign object;
- abnormal vibrations of the device are sensed.
General information
The device is intended for house gardening use only as
described and protected by these instructions for use. It can be
used for pruning branches, cutting firewood and other
applications requiring pruning of wood.
CS3010 4010
6
Summary of Contents for CS3010
