20
WPS-enabled router to connect:
This device supports Wi-Fi Protected Setup (WPS). If your router is WPS-enabled, you can use the WPS button to
connect the device to your router.
Note:
- Look at the manual of your router, you can connect a WPS such device to the router.
- It may happen that this does not work with all common routers, please use then the manual adjustment.
(1) Press the WPS button on the wireless router.
Note:
Some routers use the wireless button for WPS connection. In this case, press the WLAN button on the router
please for 6 seconds.
(2) Tap the Wi-Fi icon
in the lower right of the menu bar.
(3) Wait until the pairing is complete.
Manual wireless setup:
(1) Touch the Wi-Fi icon
in the lower right of the menu bar.
(2) Your device automatically scans for available wireless networks. The list of available networks shows all
wireless networks within range of your device.
(3) Touch the network to which you want to connect, enter the required network information (password / Network
Key), and then tap "Connect". Your machine will now try to establish a connection with this Wi-Fi hotspot with the
network parameters you entered. If the connection is successful, the message "Connected" appears under the Wi-
Fi settings.
Please note:
- The list of available networks is constantly updated.
- With an activated WLAN function your device automatically connects to your configured networks when you are in
the area.
- Find your device a network that has not been previously configured, a corresponding notification icon appears.
9 Bluetooth
Your tablet is equipped with built-in Bluetooth technology to directly connect to other Bluetooth-enabled devices,
such as other tablets (with Bluetooth interface), mobile phones, headsets or Bluetooth can connect keyboards.
With other devices to connect:
(1) Wipe with your finger from the right side to the middle, and then open the function bar.
(2) Touch the icon and then tap "All Settings" on the right edge to open the settings.
(3) In the list on the left you now tap "Device", and then on "Bluetooth".
(4). Slide the switch to the right to turn on the Bluetooth function "Bluetooth ON" is displayed.
(5) Select the device with which you want to connect from the list.
(6) Tap on it and follow the pairing wizard. You may need to enter at both or only one of the devices with a PIN
code, or compare and confirm the coupling.
Please note:
Depending on the device, another code procedures apply. For some devices, you can find a four-digit PIN number
in the manual of this device. On newer devices, the code to be used is displayed on one or both devices.
