Blaupunkt MC60BT, User Manual

NOTE:

1.  Make sure the disc is completely stopped before opening the CD door.
2.  To ensure good system performance, wait until the unit reads the disc completely before 
     doing anything else.
3.  If the disc is unreadable or if no disc is loaded in the tray, the display will show 

“NO DISC”.

PLAYING A DISC

1.  The playback starts from Track 1 automatically after a compatible disc has been loaded and 
read by the unit.
              To pause playback, press the PLAY/PAUSE button on unit or remote control. The current 
             track time will flash on the display. 
              To resume playback, press the PLAY /PAUSE button on unit or remote control again.
2.  To stop playback, press the STOP button on unit or remote control. The display will show the 
total number of tracks.

SKIPPING TO A TRACK/TIME POINT

To select a desired track 

Press the SKIP UP or SKIP DOWN buttons on unit or remote control to skip to the next or 
previous track respectively. Track numbers are shown on the display. 

To scan quickly to a point in a track

Press and hold the SKIP UP or SKIP DOWN buttons on unit or remote control to quickly scan 
forward or in reverse through a track.
The track time is shown on the display.

To select a song which track number exceeds 10

（

for MP3 disc only

）

To select a song/track which number exceeds 10, press the FOLD+/+10/M+ button each time 
to skip forward 10 tracks, then press the SKIP UP to select desired track.

To select a desired folder (for MP3 disc only)

To select a desired folder, press and hold the FOLD+/+10/M+ button each time to skip forward 
a folder, then press the SKIP UP to select desired track.

PROGRAMING TRACKS 

You can create a custom play list from your disc when playback is stopped. You can program up 
to 20 tracks for a CD disc and 99 tracks for an MP3 disc
1.     While play is stopped, press the PROG./P-MODE/M. button on unit or remote control . The 
        display will flash PROG and show “P01 001”.
2.     Use the SKIP UP or SKIP DOWN buttons on unit or remote control to select the first track to 
        be saved to the program list, then press PROG./P-MODE/M. on unit or remote control to save. 
        The display will now show the next program number (e.g., “P02 012”).
3.    Repeat step 2 to save more tracks to the program list until all tracks have been programmed.
4.    Press the PLAY/PAUSE button on unit or remote control to start playing the program list from 
        the beginning. The display will show which track is currently playing.
5.    Press the STOP button on unit or remote control to stop program playback.
        To clear the program, you may the STOP button on unit or remote control when the disc 
        stopped and open the CD compartment lid. The program is now erased. 

11 

MC60BT