Remote control battery installation
Before using the remote controller, please make sure that you have installed the batteries(included) power inside. Please
reference below operation.
1. Open the battery door on the bottom of remote control and insert 2 x AAA dry batteries into the compartment. Please pay
attention to the polarity symbol and aim it accordingly.
2. Close the battery door and put the remote controller sensor aim to the IR sensor during operation.
Notes:
a. The best working distance of remote controller is within 5 meters without any obstacle, the working angle is +/- 30 degree
base on the IR sensor on unit front panel.
b. Please dispose the exhausted battery in environmental friendly. Please reference and check your local government
requirements for the detail.
General operation
1. Speaker system connection and power on
Before start the audio playing, please connect the satellite speaker to the main unit's speaker output L/R terminals with their
attached speaker wire..
Connect the AC power plug to household AC power sourcing, press the power ON/OFF switch belong to on position from rear
panel, press the standby button on front panel of unit, or remote controller to power on the unit.
2. Volume adjustment
Rotate the volume knob, or press the Vol +/Vol – button can increase or decrease the volume level.
3. Play mode selection
Press the source button repeatedly can switch the play model between CD/USB/AUX/Bluetooth/FM.
4. Mute, play/pause, stop
Press the mute button on remote control can make the speaker output in silence, and press it again to resume the playing.
To Press the pause button for playing pause, and press the play button to resume the playing.
Press the stop button to stop the playback on CD mode.
5. Repeat/Random
To press it for repeat one, repeat all and random playback.
6. Digits button
Press the relative digit button to select the track and FM preset station; in order to select the track faster you can key-in the
track number directly, then there will skip to the track for playing after a while.
7. Fast-forward, Fast-rewind,
Press it for fast rewinding or fast-forwarding the current playing track, press it again resume to normal playback. Press and hold
previous or next button on front panel can achieve this function as well, and resume normal playing after release the button.
8. previous and next button
Press it to select last and next track.
9. Treble and bass adjustment
Press the treble or bass button first, then press the “ VOL-“ and “ VOL+” button to adjust treble or bass setting value. The speaker
output sound will be changed accordingly. There will quit the setting after wait a while.
10. Loudness and equalizer
Press the loudness button to adjust the output sound with more bass quickly; press the EQ button repeatedly to switch the
preset EQ mode between classic/rock/POP/Jazz/Dance/Liue/off.
11. LED light
Short press the button from remote controller to turn on or off the LED light which surround the CD door.
12. Eject CD:
press the eject button on front panel or remote controller to eject the CD. Press it again to close the CD.
CD operation
The system includes CD playback function, which allows you to play CD/-R/-RW/MP3/WMA format disc. Before start the CD
playback, please make sure there is no scratch or dirty dot on the disc, which affects the playing sound quality. Power on the
unit, and press the source button repeatedly on front panel of unit in order enter to the CD playback mode.
CD program :
in CD playing mode, press the “ STOP” button first, then press the “ PROG” button and shows “ P01” on display;
press previous/next button or key-in the number of track that you want to be programmed (E.g. input “04”, then the NO.4 track
will be programmed as the first playing song). Then press program button again to confirm it, the display will skip and show “
P02”. Continue to repeat the operation till the display show “full” in order to complete the track program. Then press the play
button to start the programmed track playing.
There can program up to 20 tracks for CD disc, and 99 tracks for MP3/WMA disc. Press the “ STOP” button twice can cancel the
program operation.
In CD playback mode, you can achieve the volume adjustment, mute, play/pause, repeat, fast-forward and fast-rewind,
previous and next, and treble & bass adjustment, loudness etc. function after press relative button. You also can fast select the
track by the digit button.
6
6
