2. Press the eject button to open the CD door, and load the CD disc ; press the eject button again to close the CD door. The unit
will start to read and play the CD automatically.
3. Create your own playlist ( max programmed 20 track for CD and MP3 disc, and up to 99 tracks for WMA/MP3 disc)
a. In CD playback mode, press the stop button first, then press program button to start the program operation.
b. The display will show “ “ XXX PXX”, press the previous/next or digits button to select the track that you want to be
programmed, and press the program button again to confirm.
c. Then the display will show the programmed track and skip to next program track setting. For example, “006 P01” means the
number 6 track was programmed as the number 01 track.
d. Repeat the above step b and C to set up rest track till the display show “ FULL”.
e. Then press the play button to start the playing of programmed track.
f. To cancel and remove the programmed playlist, press the stop button again, or eject the CD disc.
4. You can also achieve the play and pause, stop, mute, repeat and random, track selection, EQ, fast-forward and fast-rewind
function, introduce etc. during CD playback. Please reference the general operation part on this manual.
FM radio operation
Before start the FM radio listening, please plug on the supplied FM antenna to the FM socket on rear panel or move the unit
next to the window in order to get better FM reception.
1. Auto scan and preset radio station:
Press the source button repeatedly to enter the FM radio mode; short press the search
button from remote control or play/pause button (2 seconds) on front panel to scan and save the available radio station
automatically. The unit can save up to 40 (max) preset stations. Short press the previous and next button from front panel of
main unit, or press c/- or digits button from remote control to pick up the preset station.
2. Manual tune or auto scan:
short press the FF+/- button to increase or decrease 0.05MHz frequency per step base on the
current station; press and hold the FF+/- button, or previous/next button on front panel 2 seconds to auto scan the available
FM station in upward or downward frequency, and will stop and play the available station automatically.
3. Station memory manually:
when you tuned a favorite station by manual tune or auto scan which you desire to save; press
the memory button from remote control first, then the preset station digits will flare on display, press the c / - button
to switch the preset station location that you desire to save; Then press the memory button to confirm it; and the current FM
station will be saved. Please repeat the operation to save other station. The unit will expand and add a new preset number
automatically base on current preset station in case of you press the memory button for manual saving.
4. Go to a specific frequency station:
press the GOTO button from remote control first, then key-in the specific FM station
frequency like 1-0-4-3-0 by digits button, then the unit skip to the frequency station and play.
Notes: the unit will show the available preset station only.
USB operation
The product includes USB playback function which can decode and play the music from a USB storage device. Before start the
operation, please copy the MP3/WMA format music into a USB stick. The max supported USB stick device is up to 32 GB.
1. Before start the USB playback, please make sure the USB stick was plugged properly into the USB port. Then switch to USB
playback mode by press the source or CD/USB button. Then the unit will decode and start to play the music automatically after
few seconds.
2. In USB mode, you can achieve the play and pause, stop, mute, repeat, track selection, EQ, fast-forward and fast-rewind
function etc. Please reference the operation from the general operation part on this manual.
Notes:
a. Connect the USB stick by a USB extension cable for playback is not recommended which may produce noise or intermittent
sound due to audio data loss during transfer.
b. Decode and playback all MP3/WMA format music is not guaranteed.
c. The max supported USB device is 32GB.
d. Some USB sticks may take a little long time to playback; please kindly note this is not malfunction.
Bluetooth operation
This product includes Bluetooth function which can wireless playback the music from other Bluetooth device.
1. Press the source button repeatedly enter to Bluetooth mode, the display will show “ BLUE-T” in Bluetooth mode. Enable the
Bluetooth function and start to search available device on your Bluetooth device (please reference the device manual for
operation), then check the available Bluetooth device list on your device.
2. Select “ BP MS50BT” for pairing;
3. Select and play the music from your Bluetooth device, then the music will output from the micro system.
4. Press the previous/next button can select last and next track during playing.
5. In Bluetooth mode, you can achieve play/pause, mute, EQ etc. function. Please reference the operation from the general
operation part on this manual.
Notices:
a. All Bluetooth devices are not guaranteed for pairing successfully due to different design and brand.
b. The best working distance of Bluetooth is within 10 meters without any obstacle in between.
c. The unit only can pair and work with one Bluetooth device in one time.
d. Please quit the current Bluetooth pairing before pair with other device, otherwise the “ BP MS50BT” will not show on the
device list.
7
