84
Tuner mode
Changing the seek tuning sensitivity
(SENS )
The seek tuning sensitivity determines whether
the automatic station seek tuning locates only
strong stations or also weaker stations. You can
adjust the seek tuning sensitivity separately for
the FM and MW/LW wavebands.
Select the waveband for which you want to
set the seek tuning sensitivity.
Press the
MENU
button
9
.
The Tuner menu opens.
Press the rocker switch or
@
to select
the "SENS" function.
Press the
OK
button
:
.
Press the rocker switch or
@
to adjust
the sensitivity between "SENS LOW 1"
(lowest sensitivity) and "SENS HIGH 6"
(highest sensitivity.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Scanning all receivable stations
(BANDSCAN )
You can scan all receivable stations of a wave-
band. The scan time can be set as described in
the chapter "User settings".
Select the waveband (FM, MW, LW) whose
receivable stations you want to scan.
To change to the menu mode, press the
DIS•ESC
button
;
, if necessary.
Press the rocker switch
@
to open the
"Tune" (adjusting stations) menu.
The "BANDSCAN" function is selected.
Press the
OK
button
:
.
"SCAN" and the current frequency or the station
name appear on the display.
The tuner is searching for stations. As soon as
the tuner has located a station, it is played.
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
쏅
To continue listening to the currently scanned
station,
Press the
OK
button
:
.
After a complete search of the frequency band,
scanning stops. The previously set station is
played.
Displaying radio text
In addition to your programme, stations can
broadcast text news (radio text) that can be
shown on the display.
To switch the display of radio text on/off:
Press the
MENU
button
9
.
The Tuner menu opens.
Press the rocker switch or
@
to select
the "R-TEXT" function.
Press the
OK
button
:
.
Switch between the settings with the rocker
switch or
@
.
"RADIO TEXT"
: Radio text on.
"RADIO TEXT"
: Radio text off.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Receiving traffi c announcements
If you switch on the priority for traffi c announce-
ments, the device uses the RDS services TA
(Traffi c Announcement) and EON (Enhanced
Other Network). TA switches traffi c reports even
if you are currently listening to a different audio
source. The volume for the traffi c announcement
can be adjusted (see the chapter "User settings",
section "Changing volume presettings").
If no traffi c information station is currently de-
fi ned, the RDS service EON ensures that the de-
vice automatically changes to a traffi c informa-
tion station of the same broadcasting network
for the duration of a traffi c announcement.
쏅
쏅
쏅
쏅
쏅
•
•
쏅
02_NJerseyMP68_gb.indd 84
02_NJerseyMP68_gb.indd 84
29.10.2008 10:59:55 Uhr
29.10.2008 10:59:55 Uhr
