103
AUX mode
EN
GLISH
Naming external audio sources
(AUX EDIT )
For the two rear AUX inputs, you can enter a
separate name that is shown on the display if
you select the connected audio source.
Press the
MENU
button
9
.
Press the rocker switch
@
to open the
"Syst" system menu.
Press the rocker switch or
@
until the
"AUXEDIT" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
The current name is displayed. The position digit
fl ashes and can be changed. You can now enter
your own name with up to 12 characters:
Enter the name by pressing the correspond-
ing buttons of the
A
keys. Select the
desired letter, if necessary by pressing a
button several times.
After entering one letter, the device automatical-
ly switches to the next one. To correct any entry
errors, select the corresponding digit by press-
ing the rocker switch or
@
again.
After entering the complete name,
press the
OK
button
:
to store the name
entered.
Notes:
To quit the text input without changing
the name, press the
DIS•ESC
button
;
.
If the text entry is interrupted, e.g. by a
traffi c announcement, the previous
changes are not stored.
쏅
쏅
쏅
쏅
쏅
쏅
•
•
Mixing an external audio source
with another audio source
(MIX AUX )
You can play an external audio source simultane-
ously with any other audio source of the radio
(radio, CD, USB or
Bluetooth®
streaming).
This function allows you, e.g. to connect a mobile
Blaupunkt navigation device as external audio
source and to play the navigation announce-
ments via the radio loudspeakers while listening
to one of the other audio sources. Note that the
other audio source is not muted in this case if a
navigation announcement is broadcast.
Note:
The volume of the external audio source and
the volume of the audio source of the radio
are adjusted separately:
Adjust the volume for the radio, CD, USB
or
Bluetooth®
streaming playback with
the volume control
>
.
Use an output on the connected device
whose volume you can adjust (e.g. the
headphones output), and adjust the
volume of the external audio source with
the corresponding controller of the
device.
The simultaneous playback must be activated
in the menu. If "MIX AUX" is activated for the
FRONT-AUX-IN socket or for the rear AUX input,
the corresponding audio source is played back
together with the currently selected audio source
(e.g. radio or CD). If "MIX AUX" is deactivated for
both AUX inputs, only the selected audio source
is played back.
To switch "MIX AUX" on/off,
press the
MENU
button
9
.
Press the rocker switch
@
to open the
"Syst" system menu.
Press the rocker switch or
@
until the
"MIX AUX" menu item is selected.
•
•
쏅
쏅
쏅
02_NJerseyMP68_gb.indd 103
02_NJerseyMP68_gb.indd 103
29.10.2008 10:59:59 Uhr
29.10.2008 10:59:59 Uhr
