118
User settings
In addition, you can assign a lower volume up
to the value 0 (mute) to the volume reduction
(MUTE).
In the System menu, press the rocker switch
or
@
repeatedly until one of these
menu items is displayed:
"MUTE VOL ": Presets the volume of the
volume reduction
"TEL VOL ": Presetting the volume of the
phone call/navigation announcement
"TA VOL ": Presetting the volume of the
traffi c announcement
Press the
OK
button
:
to call up the menu
item.
The currently set volume is displayed.
Set the volume with the rocker switch or
@
.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Notes:
The volume preset by you will not be used,
if the volume currently listened to is lower
than the set mute level. The device
continues playing with the volume
listened to.
if the volume currently listened to is
higher than the set TEL volume. In this
case, phone calls/navigation announce-
ments are reproduced with the volume
listened to.
if the volume currently listened to is
higher than the set TA volume. In this
case, traffi c announcements are repro-
duced with the volume listened to.
쏅
•
•
•
쏅
쏅
쏅
•
•
•
Activating/deactivating the signal tone
(BEEP ON)
You can deactivate the signal tone that sounds as
a confi rmation in the menus or when storing the
stations on the station buttons.
in the System menu, press the rocker switch
or
@
repeatedly until the "BEEP ON"
menu item is selected.
Press the
OK
button
:
to call up the menu
item.
Switch between the settings with the rocker
switch or
@
.
"BEEP ON "
: Signal tone on.
"BEEP ON"
: Signal tone off.
Press the
OK
button
:
to select a different
function, or press the
DIS•ESC
button
;
to
exit the menu.
Setting the speed-dependent volume
increase (AUTO
SND )
When you are driving faster, the device can au-
tomatically increase the volume to compensate
for the driving noise. The volume is increased
depending upon the speed. In order for this to
work, the speedometer signal must be connect-
ed as described in the installation instructions.
The optimum setting for this volume increase de-
pends on how noise levels develop in your par-
ticular vehicle. Try the setting that is perfect for
your vehicle. You can select a value between OFF
(no increase) and 5 (maximum increase).
In the System menu, press the rocker switch
or
@
repeatedly until the "AUTO SND"
menu item is selected.
Press the
OK
button
:
to call up the menu
item.
The current setting is displayed.
Select the desired setting with the rocker
switch or
@
.
쏅
쏅
쏅
•
•
쏅
쏅
쏅
쏅
02_NJerseyMP68_gb.indd 118
02_NJerseyMP68_gb.indd 118
29.10.2008 11:00:04 Uhr
29.10.2008 11:00:04 Uhr
