101
AUX mode
EN
GLISH
AUX mode
FRONT-AUX-IN socket and rear AUX
input
Front AUX-IN socket
DANGER!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries.
The use of straight plugs or adapters leads to an
increased risk of injury.
For this reason, we recommend using angled
jack plugs, e.g. the Blaupunkt accessories cable
(7 607 001 535).
As soon as an external audio source, such as a
portable CD/MiniDisc or MP3 player is connect-
ed to the FRONT-AUX-IN socket, it can be select-
ed with the
SOURCE
button
8
. "FRONT AUX"
then appears on the display.
Note:
You can individually name the audio source
connected via the FRONT-AUX-IN socket
and mix it with another audio source. For
further details, please read the sections
"Naming external audio sources (AUX EDIT)"
and "Mixing an external audio source with
another audio source (MIX AUX)" in this
chapter.
Rear AUX input
You can connect different external audio sources
to the device via the rear AUX input:
C'n'C-ready devices from the Blaupunkt
accessories programme (e.g. an iPod®/USB
interface).
CD changer
•
•
Other external audio sources, such as
portable CD players, MiniDisc players, MP3
players or a non-C'n'C-ready Blaupunkt
interface.
The C'n'C interface from Blaupunkt (C'n'C =
Command and Control) allows an even more
convenient control of devices and data carriers
that are connected to the car sound system via a
C'n'C-ready Blaupunkt interface.
This device is factory set for the connection of
C'n'C-ready Blaupunkt accessory devices. If
you want to connect a non-C'n'C-ready device,
such as a CD changer or another external audio
source, please perform the settings described in
the following sections.
Adjusting the rear AUX input mode
You can select between these modes for the rear
AUX input:
C'n'C mode for C'n'C-ready Blaupunkt
interfaces.
Non-C'n'C mode for non-C'n'C-ready
Blaupunkt interfaces, CD changers and
other external audio sources.
The C'n'C mode is activated by default.
To switch between C'n'C mode and non-C'n'C
mode,
press the
MENU
button
9
.
Press the rocker switch
@
to open the
"Syst" system menu.
Press the rocker switch or
@
until the
"CDC" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
Switch between the settings with the rocker
switch or
@
.
"CDC ON"
: Non-C'n'C mode.
"CDC ON"
: C'n'C mode.
As soon as you change the setting, the device
briefl y switches off and back on again with the
selected setting (Reset).
•
•
•
W
W
W
W
W
•
•
