106
Bluetooth® phone call
Registering the cell phone
The device can be registered with up to
5
Bluetooth®
-ready cell phones or other devices
such as MP3 players. If you register a sixth one,
the
Bluetooth®
device registered fi rst is unregis-
tered.
To register a cell phone,
open the
Bluetooth®
menu.
The "PAIR" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
The Device menu opens. The "PHONE" menu
item is selected.
Press the
OK
button
:
.
The display shows the PIN number for the
Bluetooth®
connection. The
Bluetooth®
cell
phone can now be registered.
If requested, enter the PIN displayed in your
cell phone.
The car sound system automatically establishes
a
Bluetooth®
connection with the cell phone. If
the connection has been established, "DEVICE
CONNECTED" is briefl y shown on the display,
and the symbol for the
Bluetooth®
signal strength
appears. If no connection could be established,
then "CONNECTION FAILED" is briefl y displayed.
Notes:
The time required for the connection is
dependent upon the cell phone and can
differ from cell phone to cell phone.
If the car sound system is switched off
and on again, it automatically attempts to
establish a connection with the master
telephone (see the next section) or the
cell phone that was connected last. If the
cell phone is not available, the display
briefl y shows "NO DEVICE FOUND –
BLUETOOTH CONNECTION FAILED".
W
W
W
W
•
•
Determining the master telephone
If you register several telephones with the de-
vice, you can determine a master telephone.
The master telephone has a higher priority than
the other registered telephones:
If the device is switched on, it fi rst attempts
to establish a connection with the master
telephone. Only if the master telephone is
not available, does the device attempt to
establish a connection with the telephone
registered last.
If you register a sixth
Bluetooth®
device, the
one registered fi rst is unregistered. During
the process, the master telephone always
remains registered, even if it is the fi rst
registered
Bluetooth®
device in the list.
Instead, the next
Bluetooth®
device in the list
is unregistered.
Open the
Bluetooth®
menu.
Press the rocker switch or
@
until the
"MASTER" menu item is selected.
Press the
OK
button
:
to call up the menu
item.
A list of the registered cell phones is displayed.
Press the rocker switch or
@
to select
a telephone.
Press the
OK
button
:
.
The selected telephone is defi ned as master
telephone and identifi ed by an "M".
To delete the master telephone,
select the master telephone in the list with
the rocker switch or
@
.
Press the
OK
button
:
.
The "DELETE" option is selected in the sub-
menu.
Press the
OK
button
:
.
•
•
W
W
W
W
W
W
W
W
