background image

33

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

<

TA (priority for traffic announcements)
When “TA” lights up in the display, the
system will play traffic stations only.
Priority on/off: Press TA.

=

AF
A
lternative frequency during RDS op-
eration:
When “AF” lights up in the display, the
system will automatically seek a fre-
quency offering better reception of the
same RDS programme.
AF on/off: Press AF briefly.

Regional function on/off:
Press the AF button for approximately
two seconds until you hear a beep.
“REG-ON” or “REG-OFF” will appear
in the display (see chapter REG - re-
gional programme).

>

PTY (Programme Type)
In the PTY mode, the preset buttons
become programme type buttons. With
each preset you can select one pro-
gramme type, such as for example
NEWS, SPORT, POP MUSIC, EDU-
CATE, etc.

Preset Scan
Press SC for approximately two sec-
onds until you hear a beep.
“SCAN” and the name of the scanned
station will alternately appear in the
display. The unit will scan all stations
stored on the preset buttons.
To stop Scan / Preset Scan:
Press SC once again.

Changer operation

CD-Scan
Press SC.
“CDC-SCAN” will appear in the dis-
play.
All CD titles will be scanned briefly.
To stop CD-Scan:
Press SC once again.

;

lo
To switch the seek tuning sensitivity
level:
Press button briefly.
To switch between mono and stereo
reception:
Press button for approximately two
seconds (beep).
The stereo symbol 

 will disappear for

mono playback.

9

MIX

Changer (CDC) operation

MIX CD
The CD titles will be played at random.
The individual discs are selected in nu-
meric order.

MIX MAG
The CD titles will be played at random.
The individual discs are also selected
in random order.

MIX OFF
The Mix function is deactivated.

Press MIX as many times until the de-
sired function briefly appears in the
display.

:

SC

Radio operation

Scan
Press SC briefly –
“FM SCAN” and the name of the
scanned station will alternately appear
in the display. The unit will scan all
stations which can be received.

 Orlando DJ A gb®

13.05.2002, 11:11 Uhr

33

Summary of Contents for Orlando DJ





























Reviews: