Blaupunkt Oslo1Dock, Instruction Manual

Operating Instructions

<Prune>

If your station list includes that you can no longer receive, you can select the Prune 
option to remove any stations that can no longer be received form the station list.
1.Press the MENU button to access the main menu.
2.Press the    and    button until Prune is displayed.
3.Pres the ENTER button to confirm.
4.Use the    and    buttons to select Yes or No to prune and then press the ENTER 
   button to confirm.

<<

<<

<<

<<

Press the MENU button to view the various radio information provided by the station
broadcaster, the information will be displayed on the second line. Press the MENU button
repeatedly to scroll though the information provided, please refer  below.

: Once you reach the last info setting the next press will return you to the first setting.

Note

-This shows the current station is broadcast in stereo or mono.

Audio mode

-This is the scrolling message that the broadcaster may 

DLS(Dynamic label segment)
                                             include with their transmissions. 

-This shows the signal transmission level.

Singal strength

-This is the type and description of the program provided by the DAB+ station.

Program type

-This shows the current time and date provided by the broadcaster.

Time and Date

-This displays the channel number and the transmission frequency

Channel frequency

-If the transmission signal contains any error, it will appply corrections. 

Signal error
The amount of signal corrections are displayed as a numerical value between 0 and
99, as the value increases, you will hear the signal degrade . To improve reception ,try 
adjusting the position of the antenna.

Radio information

9

<DRC>

Dynamic range control(DRC) adds or removes a degree of compensation for the 
differences in the dynamic range between radio stations.
1.Press the MENU button to access the main menu.
2.Press the    and    button until DRC is display.
3.Pres the ENTER button to confirm.
4.Using the    and    buttons to select off ,low or high to prune and then press the 
   ENTER button to confirm.

<<

<<

<<

<<

<SW version>

In the main menu ,you can find what software version your

DAB+ radio . This option will display

the version number of the  software currently installed in your radio. This will be helpful toa 
technician who is servicing the radio

currently has.