16
4.7 Settings
4.7.1 Settings of the devices
Click the icon at end of each device row to enter the Edit Device page. The Edit Device page includes the
following device settings:
•
Zone:
The “Zone” is the number by which the device is recognized in the system. Each device takes up a single
zone number in the system.
•
Name:
Set a device name for easy recognition.
•
Bypass:
Use this function to deactivate a device. A bypassed device will be ignored by the system. All trigger
response from this sensor is discarded by the system and no alarm will be activated. The system will also stop
checking the device for any faulty condition (e. g. out of order or low battery).
•
Trigger Response:
This function is for Home Automation control. Select a Scene number in order for the
scene to be activated when this device is triggered.
•
Chime:
Enable the Chime function for the Control Panel to emit a “ding-dong” notification sound when this
sensor is triggered under Disarm mode.
•
Attribute:
The attribute determines when the system should raise an alarm according to the system mode:
•
Burglar:
When the device is triggered under away arm mode, a burglar alarm will be activated
immediately.
•
Home Omit:
When the device is triggered under Away Arm or Home Arm mode, a Burglar Alarm will be
activated immediately. When the device is triggered under Home Arm mode, the alarm will not
be activated.
•
Entry 1 / Entry 2:
When the system is in Away or Home Arm mode, if an Entry 1 or Entry 2 device is
triggered, the Control Panel will start an Entry Delay countdown timer according to the Entry 1 Delay
or Entry 2 Delay settings programmed. The user can use the countdown time to disarm the
system. (Please refer to
Chapter 4.8.2
for more detail.). After the delay period has expired and no
correct PIN code has been entered, the Control Panel will activate a burglar alarm.
Disarming the Control Panel within the 30 second period (preset entry countdown duration), will
return the system to Disarm mode and silence the siren. No alarm event will be reported.
Click “Submit” to complete the device setting changes when finished.
Summary of Contents for Q SERIES
Page 34: ...34 About...
