20
4.8 Settings of Control Panel
The Panel setting page provides access to the Control Panel operation settings. After selecting new settings,
click the
SUBMIT
button at the bottom of the page to confirm changes.
4.8.1 General Settings
•
Alarm Length:
The alarm length determines how long the built-in siren and other external sirens in the
system should sound a warning when an alarm event is triggered.
•
Supervision Timer:
The accessory devices will transmit check-in signals to the Control Panel regularly
for the panel to monitor the devices’ status. If the panel fails to receive a signal from a particular device
during a set period, the panel will consider the device as “Out of order” and send a report to the server.
Use this function in order to determine the supervision time for your accessory devices.
•
Internal Siren:
Use this function to activate or deactivate the Control Panel’s built-in siren. A deactivated siren
will not sound a warning during alarms.
•
Door Chime:
Set the Door Chime and it’s volume.
•
Warning Beep:
If not set to “No Sound”, the panel will emit a beep every 30 seconds after it detects a fault in
the system.
Summary of Contents for Q SERIES
Page 34: ...34 About...
