DATOS TÉCNICOS
ESQUEMA DE CONEXIÓN ELÉCTRICA
Señal de vídeo
CVBS
Consumo eléctrico
<40mA
Señal
NTSC
Potencia
<0,35W
Número efectivo de
píxeles
688X528
Clase de estanqueidad
IP67
Tensión
DC12V
Rango de temperaturas
de funcionamiento
-20 °C ~
+65 °C
Intensidad luminosa
mínima
0,1 lux
Rango de temperaturas
de almacenamiento
-30 °C ~
+80 °C
Accesorios adicionales
VK-RVC 4.X (cable de extensión RCA de 10 m);
SF-RVC 4.X (filtro de señal)
Restantes
Vista trasera con línea de aparcamiento, interruptor de
forma/espejo, interruptor de línea de aparcamiento,
función de control de doble bobina
Preste atención
a las flechas al
conectar
EEqquuaall D
Diiaam
meetteerr
U
UPP
U
UPP
B. Installation Guide For Bracket-Mount Camera
Blue loop: Cut to switch to front view
Purple or white loop: Cut to turn off parking line
Switch Loop Instructions:
Wiring Diagram
Remarks:
Beside flush and bracket mount cameras, we also
have bolt mount camera series, which is mounted
by following steps:
1. Select suitable flat position near the license plate light and mark it.
2. Drill a hole according to the bolt diameter.
3. Put the bolt vertically (against ground) into the hole and fix the bolt
with the screw supplied from inside.
4. Some models come with up/down image switch option, and can be
mounted with its bolt horizontal
(against ground) and its lens
downward.
1.Choose a flat position near license
plate light and make a small hole
for the first screw with a drill.
2. Use a screw driver to fix the first
screw (but not tightly).
3. Get the power/video cables connected,
and then adjust the camera properly to find
the best position for the other screw
according to the camera image in monitor.
4. Mark the position found for second
screw and make a hole with a drill.
5. Fix the second screw with a
screw driver.
A. Installation Guide For Flush-Mount Camera
B
A
1.Check to be sure the hole saw
used is with equal diameter to
that of camera.
2. Adjust the camera to turn the
UP arrow mark straight upwards.
3. Put the harness through the
hole made on bumper before
fixing the camera.
4. Put the camera into the hole and
use your two thumbs to press it
evenly for tight and flat mounting.
B
A
Special type installation location
Universal type installation location
Parameter
s
Current
Consumption
Power
Waterproof Grade
Operating
temperature range
Other
Optional accessories
-
20
℃
~
+
6
5
℃
VK-RVC 4.X (10 meter RCA extension cable); SF-RVC 4.X (signal filter)
Rear view with parking line, formal/ mirror switch, parking line swich, dual-coil control dual
functions
Video signal
Signal
Effective Pixels
Voltage
Min Illumination
CVBS
NTSC
DC12V
0.1 Lux
688X528
<40mA
IP6
7
Storage
temperature range
-30
℃
~ +80
℃
<0.35W
Cámara
para la
entrada de
vídeo RCA
del monitor
Alimentación
Cable rojo para la luz
de marcha atrás (+12V)
Cable negro a tierra
El diagrama de cableado se
aplica a la mayoría de los
modelos de cámaras (pero
no a todos), y también debe
prestar atención a las etique-
tas o marcas de los cables al
realizar las conexiones.
Pantalla LCD
Cámara de la
luz de marcha
atrás a tierra
