Connect to the power
Getting Started
1.Connect the power adaptor provided to the unit. The unit is in Standby mode, When
recharge the unit’s built-in batteries,the white LED is blinking on left side of unit’s top.
When fully charged, the white LED will turn off .
2.Press POWER button on the top to turn the unit on, the unit into bluetooth mode.
3.Bluetooth is pairing, and blue LED is blinking on right side of unit’s top, After successful
connection, the blue LED will be stayed without blinking.
4.After the unit is turn on, Press MODE button, the unit into AUX IN input mode. and red
LED is lighting on right side of unit’s top.
5.To turn the unit to standby again, press POWER button again.
5
MODE
_
+
When recharge the unit’s built-
in batteries, white LED is blinking.
When fully charged, the white
LED will turn off.
In bluetooth mode, When blue
LED is blinking, Bluetooth is pairing.
When into AUX IN mode, the red LED
is lighting.
After successful connection, the blue
LED will be stayed without blinking.
