Xlf 10A
Troubleshooting
If the device should malfunction or should there be an issue with it’s performance, please refer to the
below trouble shooting guide and wiring diagram mentioned above. Should the issue persist, please
visit a Blaupunkt Authorized Service Center.
Xlf 10A
Notes
Features:
• Subwoofer: 10” (254mm)
• Integrated Amplier: 150 watts RMS / 600 watts MAX Power
• Amplier type: Class A/B
• Enclosure type: Slim Underseat Form Factor (Sealed)
• Woofer Cone Material: Aluminium with Rubber surround
• Nominal Impedance: 3 Ohms
• Frequency Response: 32-5K Hz
• Tone Controls: Gain, Bass Boost (0, +12dB)
• Signal Input: Low Level (RCA pair), High Level (Left/Right)
• Visual Indicators: POWER/PROTECT
• Crossover Controls: Variable (50-150Hz)
• Phase Select: 0°-180°
• DC Offset: Built in-Auto Turn ON
• Fuse Rating: 25A
• External Remote Controller included in packaging
PROBLEM
Not switching on.
Power LED not ‘ON’
Not working, but
status LED ‘ON’
No sound
POSSIBLE REASON
NO + 12v to power wire
NO power to remote wire
Fuse broken
Fuse blown
Amplier too hot
Head Unit
Gain control not set up
Connections
Check Fuse and Connection at Battery
Check Remote turn on from headunit
Replace fuse with correct type and
amperage.
Replace fuse with correct type and
amperage.
Move unit to ventilated area. Turn head
unit down.
Check head unit volume level.
Ensure you have set up the amplier
gain level control
Check all power, remote on and
ground connections
SOLUTION
