OM-AF30 E V1.02
October 18, 2013
Page 16
ASHFORD 30
INSTALLATION INSTRUCTIONS cont.
OPTIONAL ACCESSORIES
Outside air kit or Fan Kit are optional accessories, but are required for the following installations:
MOBILE HOME INSTALLATION — Requires Outside Air Kit and Fan Kit
RESIDENTIAL ALCOVE — Requires Fan Kit
FAN KIT (P/N Z2814)
Th
is fan kit is REQUIRED FOR:
MOBILE HOME, any installation
RESIDENTIAL
ALCOVE
NOTE: Fan Kit should be installed before the stove is placed into position
INSTALLATION: See instructions included with Fan Kit. Tools needed: Square (Robertson no.
2) screw driver and a 5/32” Allen wrench.
ELECTRICAL CONNECTION
Your Blaze King fan kit is equipped with a three-prong (grounded) plug to decrease shock hazard.
THIS PLUG SHOULD BE INSERTED DIRECTLY INTO A PROPERLY-GROUNDED, THREE-
HOLE RECEPTACLE. DO NOT CUT OR REMOVE THE GROUNDING PRONG FROM THIS
PLUG. Do not route the power cord in front or under the stove.
OUTSIDE AIR KIT (P/N 1726B)
REQUIRED FOR:
MOBILE HOME (any installation)
Th
e outside air inlet hose is a fl exible tube to bring outside air for combustion into the stove from
outside the residence, through the wall or up through the fl oor. Th
e fl exible tube will allow some
adjustment over or around fl oor joists or plumbing. DO NOT CHANGE THE STRUCTURAL
INTEGRITY OF THE FLOOR. Th
is air hose must be kept open at all times to provide outside air
for combustion.
INSTALLATION
See instructions included with the Outside Air Kit. Tools needed: 1/4" or 3/8" drill motor, Saber
saw, Saber saw wood & metal blades, 5/16" nut driver or wrench, 7/16" wrench, Small tube of
hi-heat silicone.