OM-BRII/90I.PUB
Page 10
Version 1.01
Printed: May 25, 2011
BRIARWOOD II INSERT STOVE INSTALLATION PROCEDURE
AFTER YOU READ AND FULLY UNDERSTAND THE MATERIAL IN THIS MANUAL, YOU ARE
READY TO PROCEED WITH THE INSTALLATION OF YOUR STOVE.
SAFETY NOTICE: IF THIS HEATER IS NOT PROPERLY INSTALLED, A HOUSE FIRE MAY
RESULT. FOR YOUR SAFETY, FOLLOW THE INSTALLATION DIRECTIONS. CONTACT
LOCAL BUILDING OR FIRE OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION
REQUIREMENTS IN YOUR AREA.
Before beginning the installation, thoroughly clean and inspect the fireplace and chimney
you are using.
Professional assistance is recommended. Your local certified installer
should be contacted to provide installation and inspection services. Check the fireplace
and insert dimensions to ensure the insert will fit properly. Keep the required clearances in
mind when planning your installation. page 9 of this manual.
To ensure safe proper operation, Listed Stainless Steel Flue Liners are required for
installation in Canada and recommended in the United States. Check your local codes and
regulations before installing.
BRIARWOOD II OPTIONAL COMPONENTS
Your Briarwood Insert is listed for use
with the following components:
Z1514B - Optional Fans
Z0845C - Shroud Trim
ZBR561G - Gold Door Trim
Installation—General
Custom Made Adaptor
Plate To Fit Fireplace