4
Chapter 1: Getting Started
MicroSD Memory card
You will need a microSD card to store photos, music, videos and other data.
To install the microSD memory card
1. Insert the memory card with the gold contacts facing down.
2. Push the memory card until it clicks into place.
To remove the microSD memory card
1. Before removing the microSD card, go to
Settings
>
SD card
,
USB Mass Storage & phone
storage
>
Unmount SD card
.
2. Push the memory card down to eject it from the slot.
1.4 Charging the Battery
The battery shipped with your smart-phone is only partially charged. To fully charge the battery, charge it for 2 hours.
CAUTION: Please read “SAFETY PRECAUTIONS FOR BATTERY USE on page 53.
1. Open the Micro USB port cover.
2. Plug the battery charger as shown in the diagram.
3. Plug the AC adapter to the wall outlet to start charging.
When the battery is charging, the red LED is illuminated and steady; the
icon is also
displayed on the status bar. When the battery is fully charged, the red LED is turned off and the
green is on, indicating that the phone is full charged. If the phone is turned on, the
icon is
also displayed on the status bar.
NOTE:
• The battery can also be charged while your smart-phone is connected to a computer.
• For safety reasons, do not remove the battery from the phone while the battery is being charged.
1.5 Using the Headset
For hands-free conversation or listening to music, plug a headset into the headset jack.
NOTE:
• When using a headset, your ability to hear outside sounds may be limited.
• Use your headset with caution. When using a headset, do not set the volume to maximum level as this may damage or cause
loss of hearing.
1.6 Turning the Phone On or Off
After installing the SIM card and charging the battery, you are now ready to turn on your phone.
To turn on your smart-phone
Press and hold the power button until the phone vibrates.
To turn off your smart-phone
1. Press and hold the power button for 5 seconds while the display is on.
2. A pop-up window appears, Select Power off.
3. Select OK to confirm.
To set your smart-phone to Sleep mode
To set your phone to sleep mode, press the power button briefly. This will turn the display off.
To turn the display on, briefly press the power button one more time.
Summary of Contents for F800
Page 1: ...User s Manual ...
Page 64: ...59 Index ...