DEVICE
PURPOSE
SwitchBox is an affordable and high power smart relay (module which can switch on and off electric power) which allows you
to control almost every household device like lamps, fans, kettles, radiators, etc.
It can be controlled directly from your smartphone, through your home network or from anywhere in the World using the
Internet. You can also control it locally using signal input e.g. to operate switch push button or motion sensor.
D
ANGER
OF
ELECTROCUTION
!
All work on the device may be performed only by a qualified and licensed electrician.
Even when the device is turned off, voltage may be present at its terminals. Any works introducing changes into the
configuration of connections or the load must be always performed with disconnected voltage (disable the fuse).
Do not connect the device to loads exceeding recommended
values.
Connect only in accordance with the diagram presented in the
manual. Improper connections may be dangerous.
I
NSTALLATION
1.
Remove enough insulation from the wires to connect
them according to one of the diagrams.
2.
Ensure that device is connected properly and antenna is far from metal objects, electrical wires, etc. which can
influence signal. Switch on the power supply.
