Blichmann Engineering Pro Series, Assembly Operation Maintenance Manual

Wiring the RipTide™ Pumps

Step 1:

 After the RipTide pumps are mounted, punch out three holes in the junction box. (Fig. 4)

Step 2:

 Mount the RipTide wires and the power cable through the 1/2” conduit connector. (Fig. 5)

Step 3:

 Mount the extra ground wire to the junction box. (Fig. 6)

Step 4:

 Using the wire nuts, secure the wires together(Fig. 7). 

Use the wire chart to determine what colors to secure together. 

Step 5:

 Attach the junction box plate. Your parts kit will come with velcro straps with

adhesive for cable managment. Stick underneath table to support the cables. (Fig. 8)

Wire Chart

Green & Green wire together

White & Blue wire together

Black & Brown wire together

Fig. 5

Fig. 4

Fig. 6

Fig. 8

Fig. 7

Installing the RIMS-Rocket™

Mount the RIMS-Rocket™ with the HopRocket™ 

Mounting Bracket. Use the 5/16 hardware to secure 

the mounting bracket to the table. (Fig. 9) 

Note: The Mounting Bracket will come with a t-slot 

plate that is used for the TopTier stand. This will not 

be needed for the Pilot System. 

Fig. 9

3

Not Needed