Blinc Bluetooth Compatible Helmet, User Manual

5 

To turn the BLINC™ headset off 

Press and hold the Call Handling Button (MFB) for approximately 5 seconds until 

you hear a short high tone followed by a short low tone. The BLINC™ headset 

indicator light switches off. 

Seeking Mode 

Press and hold “Multifunction button” on Bluetooth Helmet until the blue and red 

indicator lights blinking. (Around 6~7 seconds) 

To pair the BLINC™ headset with a phone or 

another device 

You need to pair the BLINC™ headset to a phone or other device. 

On the phone enter the searching Bluetooth device mode and press and hold the 

Call Handling Button (MFB) for approximately 5 seconds until the indicator light blue 

and red on the Control Buttons flashes alternately. Operate the phone to discover and 

connect the BLINC™ headset. 

The BLINC™ headset passkey

is

0000

. If 

pairing is successful the BLINC™ headset indicator blue light flashes slowly and 

indicator red light is off. Pairing should be done only once. Each time you use your 

headphones, it will be automatically connected to your phone. Note: Before enter 

pairing mode, please make sure other Bluetooth devices are switched off. 

Example

of

BLINC™

Headsets

Set

‐

Up

from

PDA

Phone:

Choose Setup    

Function                             

1