5
Bluetooth® Headset Control Buttons
Power on: Press MFB button about 2 seconds, blue led flash
and prompt“Power on”.
Power off: Press MFB button about 5 seconds, red led flash and
prompt“Power off”.
Pair with Phone: Please make sure the headset is in power off
position. Push the MFB button for at least 5 seconds till the
LED flashes in red and blue alternately and you will hear a voice
prompt saying “Pairing” in the speakers. Enable your Bluetooth
function on your mobile phone. Your mobile phone will now
scan nearby devices and find a device named “BLUETOOTH
HELMET”. Please allow your mobile phone to pair with this
device. When pairing has completed and the headset is ready
to use. You will hear a voice prompt from the headset saying
“Pairing success-ful” in the speakers.
Once pairing between the two devices is successful, the LED
lights on the headset will change from red and blue flashing
lights to a blue LED light only. Note: If a PIN code is required
by your mobile phone, please enter “0000” If you paired the
headset with your phone , the headset will connect your phone
automatically when you turn it on again.
-
VOLUME
+
VOLUME
Multi Function Button
MFB
VOLUME
INCREASE
VOLUME
DECREASE
BLUE LED
RED LED
EN
