7
THIRD STEP
DRIVER SETTING / Connect: Press and release immediately
MFB button, wait until the red Led stop blinking.
PASSENGER SETTING / Connect: Do nothing, wait for Driver
Connection, after this the red Led stop blinking.
Helmets are now ready for intercom use: intercom connection
will be established between the two helmets automatically by
either driver or passenger by pressing the MFB button once;
Intercom calls can be terminated pressing MFB again.
You can pair the first and second Bluetooth device or mobile
phone to the headset by following the simple procedures in
“Pairing with your mobile phone”.
After second Bluetooth device or mobile phone confirms that
pairing has completed, select the headset in the list of the
devices on your first Bluetooth device or mobile phone. The
headset is ready to use for two Bluetooth devices or mobile
phones.
Start/End intercom: When the headset power on, short press
POWER button to start or end the intercom.
Voice Dial: Power on the headset and standby, rotate the
POWER button twice clockwise.
Last number redial: Power on the headset and standby, rotate
the POWER button twice anticlockwise.
-
VOLUME
+
VOLUME
EN
