7
1
6
The On/Off Button
The Home Button
From the moment you turn on the Tango, you’ll
appreciate the care in every detail. On/Off is easy to
press, but recessed to avoid accidental activation.
How to plug in the Tango.
To turn on the Tango, press
on/off
.
When you turn on the Tango, you’ll always start off
on the Home Screen. This screen contains the major
functional areas of the Tango.
If you need to restart the Tango, just hold down
on/off
for a few seconds. The Tango will reboot, and you’ll
return to the Home Screen.
Press a few random Screen buttons to go
somewhere new. Then press
home
. You’ll be
taken right back to the Home Screen.
The Home button remains lit. That means it’s
active and remembers where you just came
from. Press the Home button again, and you’ll
return to the place you were.
The Home button always takes you right back to
the top level of the Tango. Remember, “If you’re
lost, just go home.”
Getting Started
Plug in the Tango
The Tango comes fully charged, so you can start
communicating right out of the box. However,
once the battery runs down, you will need to
recharge. Simply open the flap on the left of the
Tango and plug the power adapter into the top slot
with the icon of the plug.
Good news: The battery should last you a full eight
hours! You can also order additional batteries. To
change the battery, simply open the compartment
underneath the Tango by pressing down on the
two recessed areas.
Power Up
7
