HAMMOCK STAND CANOPY
Step 5
Hook rope of canopy around upper hook.
Step 7
Using each of the (4) Clips, wrap them around the ends of the hammock
spreader bars, in between the hammock ropes (not the Hammock Bed) &
close the clip.
Step 8
Tighten the clip for each side until taut. This further stabilizes the
Hammock Canopy.
Step 6
Pull Tethering Ropes down towards the “Z” hook and tie it in a
secure knot* on each side until the canopy is the desired height.
ASSEMBLY INSTRUCTIONS (CONTINUED)
