1.2 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT
1.2 FARAD DIGITAL POWER CAPACITOR WITH INSTALL KIT
1. Disconnect vehicle's battery.
2. Select mounting location for capacitor
3. Select a convenient location for installation of the distribution block.
4. Cut power and ground wires to existing amp or route wires to block for
a new install.
5. Connect the wires so they continue through the distribution block
on to the amp.
6. Connect ring terminals on power and ground wires to
capacitor and route wires to distribution block.
7. Cut wires to length and make connection.
8. Reconnect battery and enjoy a better sounding
system!
QUICK & EASY INSTALLATION
WIRING DIAGRAM
WIRING DIAGRAM
BLITZ 1.2 Farad
Power Capacitor
(Supplied)
BLITZ 1.2 Farad
Power Capacitor
(Supplied)
4ft of 4 ga Power &
Ground Wire (Supplied)
4ft of 4 ga Power &
Ground Wire (Supplied)
0/4 ga Main Power & Ground wire
Distribution Block(Supplied)
0/4 ga Main Power & Ground wire
Distribution Block(Supplied)
Power Source(Battery)
Power Source(Battery)
Power to Amplifier
Power to Amplifier
Your Amplifier
Your Amplifier
www.blitzaudio.com
www.blitzaudio.com
BZKT12
BZKT12
