11 Front Channel High/Pass Frequency
Extender
Positioning this switch at the x10 position changes, the range of selectable crossover
frequency for the front channel high-pass from 160 Hz -800 Hz to 1.6K Hz - 8K Hz.
7
f e a t u r e s a n d s p e c i f i c a t i o n s
12 Subwoofer Frequency Selector
13 Bass-Boost Frequency Control
14 Bass-Boost Level Control
15 Phase Inverter
16 Subwoofer Stereo/Mono Switch
17 Front Channel Output Gain Control
18 Left/Right Front Channel Output
Terminals
19 Rear Channel Output Gain Control
20 Left/Right Rear Channel Output
Terminals
21 Subwoofer Output Gain Control
22 Left/Right Subwoofer Output
Terminals
23 Subwoofer Output Level Remote
Control Terminal
For selection of the low-pass crossover frequency for the subwoofer channel between 50 Hz
and 160 Hz.
For setting the frequency (from 40 Hz to 120 Hz) at which the BASS-BOOST circuitry generates
frequency boost to equalizer the woofer enclosure.
For selection of the boost level (from 0 to +12 dB).
Positioning the switch to the "180" position shifts the subwoofer output signals 180 degrees
out-of-phase relative to the front and rear output signals.
For selection of stereo or mono mode subwoofer output.
For adjusting the front channel output signal level.
To be connected to the front channel amplifier left/right inputs.
For adjusting the rear channel output signal level.
To be connected to the rear channel amplifier left/right inputs.
For adjusting the subwoofer channel output signal level.
To be connected to the subwoofer channel amplifier left/right inputs.
To be connected to the remote control for exclusive maneuver of the subwoofer output level,
and the subwoofer output level control on the unit ("21" above) is by-passed.
FEATURES AND SPECIFICATIONS SUBJECT TO CHANGE AND / OR IMPROVEMENT WITHOUT NOTICE.
